Cleaning, Care & Maintenance; Troubleshooting - Caterlite L077 Manual Del Usuario

Ocultar thumbs Ver también para L077:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Cleaning, Care & Maintenance
Always turn off and disconnect the appliance
from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the
appliance.
• Dry thoroughly after cleaning.
• The spout filter slides out for ease of cleaning.
• Periodically clean the inside of the appliance using a suitable
descaling solution.
De-scaling
For the best water quality, Buffalo recommend that a water filter is installed to the mains water supply,
particularly in hard water areas. Doing so will reduce the build up of limescale and contaminants in the
water tank thus maintaining energy efficiency and prolonging the life of the appliance.
To de-scale the appliance:
1. Pour a solution of de-scaler and water into the appliance.
2. Brush the interior gently with a soft bristled brush.
3. Discard the solution collected in the jug.
4. Fill the appliance with clean water and turn back On to flush out the system. Flush out the system
thoroughly to remove any de-scaler residue.
5. The appliance is now ready for use.
Note: Use a suitable de-scaler and always follow the instructions on the
packaging.
Caterlite recommend that this appliance is de-scaled every 3 months or more
frequently in hard water areas.
IMPORTANT: Failure to de-scale or maintain will invalidate your guarantee.

Troubleshooting

Fault
The unit is not working The unit is not switched on
L077_ML_A5_v6_20211123.indb 5
L077_ML_A5_v6_20211123.indb 5
Probable Cause
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Solution
Check the unit is plugged in correctly and
switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
UK
5
2021/11/23 13:39
2021/11/23 13:39

Publicidad

Tabla de contenido
loading

Tabla de contenido