Tare Function; Overload Indication - MasterChef VRD919102104 Manual Del Usuario

OPERATION
1. Please the scale on a hard & flat surface.
2. Push M-Swirl logo in the middle of the scale for 2 seconds, the LCD will show as
below.
3. Put food on the scale, the LCD will show the food weight.

TARE FUNCTION

1. Under "Weighing" mode, place a container on the scale, LCD will show the weight of
container.
2. Touch "TARE" key to clear the weight of the container, then put food into container ,
the LCD will show the food weight only. *Repeat to touch "TARE" key to weight more
different food.
3. When food and/or container is removed from scale container, the LCD will show
a negative load value; touch "TARE" key, after 2 seconds the scale will turn into
"weighing" mode.
UNIT COWNVERSION (g/kg/oz/lb`oz/ml/L)
• Under "Weighing" mode, Touch "UNIT" key to convert "g" or "oz" etc. as demand.

OVERLOAD INDICATION

If the weight is over loaded "Max. Capacity" The LCD will show
"EEEE".
LOW POWER INDICATION
When show " Lo " on display, Open the battery cover on the
back and replace the new battery with correct polarity.
- 5 -