Comfort Glow QDE8600 Instrucciones De Instalación Y El Manual De Propietario página 8

3. Setting Desired Temperature
Only in Auto heat-up can setting temperature be performed.
Appliance
4. Setting Timer-Power off
Appliance
All manuals and user guides at all-guides.com
Adjust the desired temperature by pressing the Up/Down arrows on
the control panel or remote control.
Remote
Set temperature indication varies from 59° F to 86° F, increasing
2-3° each level. Once you have chosen the desired temperature,
the heater will remain on until the room temperature increases
to the ser temperature. The heater will cycle on and off to
maintain the desired room temperature.
Press Timer button either on the control panel or remote control.
Timer indicator will illuminate on the 2h Seting
Remote
Press Timer button to increase timer by 2 hour incriments.. When
all 4 lights are off, that indicates the timer is not set.
8