Publicidad
Idiomas disponibles
Idiomas disponibles
1
MOUNTING UNIT TO WALL
1. Locate two studs in the wall where you want to mount the shelf. Mark the
area and measure the distance between them.
2. Using the Wood Hanging Rail (fig 1) mark where you need the screws in order
to line them up with the studs. The Wood Hanging Rail should be fastened to
the wall approximately 3" down from the desired height of the shelf.
FIGURE 1
3. Making sure that the Wood Hanging Rail is level, fasten it to the wall as shown
(fig 2) into the studs using wood screws. Try to find at least one stud within the
marked area. If stud is not available use toggle fastener to secure the shelf to
the wall. (Wood screws and fasteners not included)
FIGURE 2
4. Shelf is now ready to be mounted to wall. Lift shelf onto Wood Hanging
Rail. (fig 3)
FIGURE 3
2
Please read instructions before assembly process.
Back of unit
Publicidad
