AMAZON COMMERCIAL AB-P100 Manual De Instrucciones página 8

Installation
Step 3:
• Placing the pump in a basin and connecting the check valve: connect the discharge
pipe (1) to the elbow (2), union(3),check valve(4), and gate valve(5).
NOTICE
NOTICE
8
3
1
Verify the switch has at least 1 in. clearance to the side wall of the basin
and is free to move throughout its movement. If optional control device
or float is used, follow mounting instruction supplied with device or float.
Install a gate valve or ball valve if required by local, regional or state code.
5
4
2