Safety Instructions - Marmitek Link ME Manual De Instrucciones

Safety Instructions

Please read these instructions thoroughly before you
use the device and keep them for future reference.
• Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Repairs or service should only be performed by
qualified personnel.
Requirements
This product requires a stable working Wi-Fi network
(user name/password) connected to the Internet.
Product introduction
The wired Zigbee gateway is the central component of
the Zigbee network. Zigbee products (intelligent
switches, power outlets, door magnets, PIR and other
products) are added to the network through the gateway
to establish communication with other Zigbee products.
The gateway is connected to the router via the network
cable to establish communication with the Cloud and the
Smart me app. The Zigbee products can be viewed and
controlled via the app.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Link ME
Make sure your smartphone is connected to the router's
wifi network to which you are going to connect the Link
ME.
Make sure the Link ME is powered via the Micro USB
connector and connect the network cable to the Link ME
and your router.
Check that the network light is on continuously, if not,
press the reset button until the network light comes on
continuously.
Launch the Smart me app from your smartphone or
tablet.
Click on the + (top right corner) to add a new product,
confirm that the network light flashes quickly and follow
the instructions.
Press Help button during installation for more
information or when installation fails.
Notes for using the product
After installation is complete, you can use Link ME to
install Zigbee products using the app.
Check our website
www.marmitek.com
details and how to use the Smart me products.
Technical specifications
Supported devices
Connection
Wireless technology
Operating range
Power
Power consumption (max.)
Standby current
Dimensions (h x w x d)
Connect your phone to Wi-Fi
Network
Reset button
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Link ME is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at
www.marmitek.com
for more
max. 128
RJ45 port
Zigbee 3.0
up to 30 meters
100-240 VAC 50/60 Hz, 5
VDC micro USB adapter
5W
< 0.5 W
90 x 90 x 23 mm
Network cable
Link ME
Wifi wireless router
LAN port
Status
Network connection
5 VDC micro USB