Koenic KSF 400-M Manual Del Usuario página 18

EN
Assembly
1. Apply the weight to the base.
2. Install the extension pole with the screws.
3. Pull up the extension pole and secure it by
tightening the thumb screw.
4. Remove thumb screw from the upper end
of the extension pole.
5. Attach the motor unit to the extension
pole.
6. Install and tighten the thumb screw to hold
the motor unit in place.
7. Install the rear guard with the handle
pointing up and fix it with the nut.
8. Slide the fan blade onto the motor shaft,
aligning and tightening the screw to the
groove.
9. Hook the front guard onto the rear guard.
10. Install the screws and nut to lock the guard.
Close the clips.
Caution
The product must not be disassembled
during operation, general care, cleaning and
user maintenance.
Caution
Never connect the product to the mains
when it is not completely assembled.
16
KSF400M_A5_121205.indb 16
All manuals and user guides at all-guides.com
5/12/12 4:56 PM