Technical Information; Nmea 0183 Sentences - Furuno GP-330B Manual Del Operador

4.

TECHNICAL INFORMATION

4.1

NMEA 0183 Sentences

Transmitted NMEA 0183 Sentences
$GPDTM*
$GPGGA*
$GPGLL*
$GPGSA
$GPGSV
$GPRMC*
$GPVTG*
$GPZDA*
* Default output
Received NMEA 0183 Sentences and Commands
$PAMTC,ALT
$PAMTC,BAUD
$PAMTC,DATUM
$PAMTC,EN
$PAMTC,ERST
$PAMTC,OPTION
$PAMTC,POST
$PAMTC,QPS
$PAMTC,QV
$PAMTC,RESET
$PAMTC,SIM
$PAMTX
$PFEC,pireq
Datum Reference
GPS Fix Data
Geographic Position -Latitude / Longitude
GNSS DOP and Active Satellites
GNSS Satellites in View
ecommended Minimum Specific GNSS Data
Course Over Ground and Ground Speed
Time and Date
Setting related to the altitude of the sensor
Change the baud rate from the nominal 4800 baud to 38400 baud
Define local datum
Enable/disable transmission of specific sentences, and change their rate of
transmission
Reset the user portion of nonvolatile EEPROM to factory defaults
WAAS ON/OFF. Set 2d/3d/Auto mode. Set WAAS Satellite. Set WAAS Tzz
Parameter.
Set Query Power On Self Test function
Query part number and serial number versions
Query GPS hardware and firmware versions
Reset the GP-330B
Enable/disable Simulate Mode
Pause or resume all automatic transmission of messages
Request to $PFEC,pidat
12