Care And Maintenance; Troubleshooting - Allen + Roth LWS0547A Manual De Instrucciones

CARE AND MAINTENANCE

• Make sure mounting surface and backplate are free of dirt. Using exterior grade caulk, apply caulk
to the top and sides of backplate where it meets the mounting surface.
• Do not caulk bottom of backplate to ensure proper moisture drainage.
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM
Bulbs will not light.
Fuse blows or the
circuit breaker trips
when light is turned
on.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for
five (5) years from the date of purchase. If within this period the product is found to be defective in
material or workmanship, the product must be returned, with a copy of the original sales receipt as
proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its option,
repair, replace or refund the original purchase price to the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation
and specifically excludes liability for direct, incidental or consequential damages. As some states do
not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may
not apply to you. This warranty gives you specific legal rights. You may have other rights that vary
from state to state.
POSSIBLE CAUSE
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
CORRECTIVE ACTION
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
Lowes.com/allenandroth
7