MAURER 53611 Manual De Uso página 13

7.3 Setting of pressure
• In the normal mode hold "BARO" button for 3 seconds,it can set the pressure value.
• Press -/RCC or +/°C/°F button to adjus the pressure value.
• Press "BARO" button to confirm and quit.
8. Weather forecast symbols
• The weather station has five different weather symbols(sunny,slightly cloudy,cloudy,rainy,stormy,snow,
heavy snowy).
• The weather forecast relates to a range of 12 hours and indicates only a general weather trend. The
accuracy is about 70 %.
• For example, if the current weather is cloudy and the rain symbol is displayed, it does not mean the
product is faulty because it is not raining. It simply means that the air pressure has dropped and the
weather is expected to get worse but not necessarily rainy. The accuracy is about 70 to 75%.
• The sun symbol also appears at night if there is a starry night.
Fig. 3
sunny
stormy
Note:
Please note that the forecast symbol will become more defined in the course of operation. The forecast
symbol is active right from the start, however, the reliability of the forecasts increases with the amount
of data collected. The sensor must adapt initially to the reference level at the site.
9. Thermometer and hygrometer
• If the measure values above the range,then temperature display "HH.H",humidity display "HH%".
• If the measure values below the range,then temperature display "LL.L",humidity display "LL%".
9.1 Maximum/Minimum function
• Press the MAX/MIN button in normal mode,MAX appears on the display.
• You can now get the highest values for the indoor and outdoor temperature and humidity since the last
reset.
• Press the MAX/MIN button again,MIN appears on the display.
• You can now get the lowest values for the indoor and outdoor temperature and humidity since the last
reset.
• Press the MAX/MIN button once more, to go back to the present values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the MAX/MIN button for two seconds while the maximum or minimum values are
displayed to clear the recorded readings.
9.2 Setting of the temperature unit
• In the normal mode you can change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
• Press the +/°C/°F button.
partly cloudy
snowy
-5-
cloudy
heavy snowy
rainy