Charging The Battery; Attaching And Adjusting The Wrist Strap - Ultramax UXDV-3HD Manual Del Usuario

Charging the battery

Connect one end of the adaptor to the camcorder and the other end to a power outlet.
Please charge the battery at least 8 hours for first time use.
1. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other
end to a wall outlet.
OR
Connect one end of the supplied USB cable to the USB port of the camcorder and the other end
to a powered PC. Make sure the camcorder is powered off.
2. The charging LED turns red and the charge starts.
3. When the charging is interrupted or the battery pack is fully charged, the charging LED will turn
off.
When using a PC to charge the battery, do not power on the camcorder, or the charge
will stop.

Attaching and adjusting the wrist strap

Attach the strap to the strap holder on the front of the camcorder, then attach the other end to the
strap holder on the back of the camcorder, as shown in the illustration.
1. Open the cloth of the wrist strap.
2. Adjust the length of the strap according to your palm size.
3. Close and affix the cloth of the wrist strap.
3