Clip assembly
For attachement place the latch onto the lock area slot on the back
side of the rear charger unit and then pull it up to fix it. A "clic" sound
confirms the fixation.
For detachement push the clip downwards to detach it from the
rear charger unit and change it.
Operating instructions
Connect the front unit of the charger into the cigarette lighter
socket of your car.
Then attach the back seat charger to the preferred positions.
Use any of the USB port to charge your mobile device or
tablet.
NOTE: Each of the four USB ports will support 5V/2.4A maximum
output power for simultaneous charging.
Push up for lock
Push down for unlock