Overmax Camspot NVR 8.0 Manual Del Usuario página 20

3.
The password may consist of numbers, letters and special
characters. The password must include 12 characters at the most.
5. How to log out (see fig. 5):
EN
•
The user must re-enter its user name and password after
logging out.
Reset
•
Switch off
•
6. How to manage memory (see fig. 6):
Description of function: Configure and manage memory of the
device. Up-to-date information about hard drive is displayed in
the menu. It includes hard drives connected, access interface,
status and drive capacity. The hard drive may be formatted. Click
the relevant function with a right key of the mouse to enter it.
Note: Switch the device off before you install it or before
you replace hard drive
7. How to manage users (see fig. 7a, 7b):
Description of function: In users management function, you
can add user, delete user, modify user, modify password.
Press „OK" with a left key of the mouse and log in.
If you have to log out while using the device, press
the menu with a right key of the mouse and choose to
deactivate the system. Press log out to finish.
If you have to restart the device, click the short menu
with a right key of the mouse, choose to shut the
system down and press restart to finish.
If you have to switch the device off, press the menu
with a right key of the mouse, select „shut system
down" and press switch off to finish.