Publicidad
Idiomas disponibles
Idiomas disponibles
KPS-FC500MX - INSTRUCTION MANUAL
SKU: KPSFC500MXCBINT
PLEASE READ THE MANUAL BEFORE OPERATING THE EQUIPMENT
The KPS-FC500MX photocontrol automatically switches the lighting on and off according to the intensity
of ambient lighting, and is not affected by temperature and humidity. It switches on when the ambient light
is below the cut-off level and off when it exceeds it.
SPECIFICATIONS:
Power supply: 105-285V~
Power frequency: 50-60 Hz
Cut-off twilight threshold: 35-65 LUX
1000W/1800VA
CONNECTION DIAGRAM WITH PHOTOCONTROL
BASE:
Disconnect the electrical voltage before installation
Connect the black and white wires to the power supply
Connect the white and red wires to the electrical load
OPERATION TEST:
- Use the cover element to cover the display during the day
- When the window is covered, the load should be turned on
- When the window is discovered, the load should be turned
off
- Be sure to remove the cover element at the end of the
test
TO BE TAKEN INTO ACCOUNT IN THE INSTALLATION:
- There must be no objects in front of the photocontrol that
obstruct natural light
- Do not install the photocontrol below the luminaire
INSTALLATION DIAGRAM:
Plug the photocontrol into the base
kps-intl.com
APAC: MGL GLOBAL SOLUTIONS LTD
Taipei, Taiwan.
info.apac@mgl-intl.com
EMEA: MGL EUMAN S.L.
Asturias, Spain.
info.emea@mgl-intl.com
AMERICAS: MGL AMERICA, LLC.
US East Coast: Charlotte, North Carolina.
US West Coast: Brea, California.
info.na@mgl-intl.com
www.mgl-intl.com
ENGLISH
Publicidad
