Configuration - T'nB SHCAMHD Manual Del Usuario

EN
TECHNICAL FEATURES
Optical sensor CMOS 1/2.7" megapixel progressive optical scan sensor
Lens 2.8mm@F1.8
Image resolution 1920 x 1080P
Night vision Up to 7m
Viewing angle
Horizontal 107°, vertical 57°
Audio Microphone included
Audio output
Loud speaker included
Communication Yes
Movement detection Yes
Alimentation DC 5V/1A
Micro SD card Up to 128Gb
Network
WIFI iEEE 802/11 b/g/n 2.4Ghz
Compatibility Android, iOS
Dimensions
Ø 61mm*116mm

CONFIGURATION

Download the application
• Download the T'nB Smart application, available for free through the
iOS and Android App store.
• Follow the instructions for creating your account.
• Once you have created your account, connect the camera.
• Add the SHCAMHD device and follow the instructions for the T'nB
Smart application.
• When the camera is connected, it can be controlled from the App.
FUNCTIONS
Alarms Activate/disconnect the movement sensor. Program it to detect movement.
Communicate through the camera by pressing and holding the 'Speak'
Speak
button.
Record videos on your smartphone or tablet. For continual recording, use a
Recording
Micro-SD card.
NOTICE SHCAMHD 90X140-EXE.indd 8-9
FUNCTIONS
Night vision up to 7 metres.
Day/night Ability to turn off the indicator light from the application in «Device features»
- «Indicator light».
Standby
Standby mode is available when the camera is not in use.
Share the camera with other users. Each user must create their own T'nB Smart
account to use this facility. To share SHCAMHD, go to the camera settings,
click on «Device Sharing» and enter the user's email. Warning: If you want
Sharing
to use the SHCAMHD at the same time as an administrator through another
account, the initial administrator will have to delete the device from his T'nB
Smart account.
COMPATIBLE WITH GOOGLE ASSISTANT™*
• SHCAMHD can be synchronised with Google Home
• Follow the on-line instructions:
https://support.google.com/googlehome/answer/7073578?hl=fr
To connect SHCAMHD to your TV, use Chromecast Google :
• First check that your Chromecast is installed and connected to the
same WiFi network as your Google Home application.
Use voice commands to run SHCAMHD on your TV :
• Say "OK Google, show me [camera name] on the TV" or "Run [camera
name] on [Chromecast name]" ...
• To stop the service, say "Stop [Chromecast name] TV
*See the availability of Google Home™ in your country.
COMPATIBLE WITH AMAZON ALEXA™**
• SHCAMHD can be synchronised with Amazon Alexa
• Follow the instructions through the "Amazon Alexa" App.
Use voice commands to run SHCAMHD on Alexa Echo Show :
• Check that SHCAMHD is connected to your Alexa account
• Say "Alexa, show me [camera name]
• To stop the service, say " Alexa, stop [camera name]
**See terms and availability of Amazon Alexa & Alexa Echo Show in your country.
19/02/2019 15:16