weasy PINT568 Manual De Instrucciones página 13

4. The tap unit must be installed
firmly. Normally, the tap handle
should be stuck straight up. Pull
the tap handle at about 15℃,
the beer begins to be released.
When at 90℃, the tap handle is
located, once the hand goes,
the handle will have a automatic
reset.
5. When the 5L HEINEKEN keg
is not needed, replaces the tap
unit by the seal, then you can
regard it as a refrigerate unit
with four bottles of 310mm high
beer or 12 tins of beverage.