Amano PIX-10 Manual De Operación página 11

All manuals and user guides at all-guides.com
Page 8
7. The End of the Daylight Saving Setting
Note: The Daylight Saving Setting only needs to be programmed once.
Once set, it will automatically adjust year after year.
1. When the display flashes
button.
2. Press the CHANGE button until the correct year appears,
then press the ENTER button.
3. Press the CHANGE button until the correct month
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date appears,
then press the ENTER button.
5. When the display flashes the correct year, month and
date, press the ENTER button.
6. When the display flashes
button to move to the end of the Program.
Note: To disable the Daylight Saving Setting, set the beginning and
ending date to the same date.
8. Exit Program Mode
1. When the display flashes
to exit the program mode.
PIX-10
, press the ENTER
EdL
P P 4 4
, press the CHANGE
EdL
P P 4 4
E n d , press the ENTER button
E d L
P P 4 4 _ _
l 0 2 8
9 9 0 0
l 0 2 8
9 9 5 5
l 0 2 8
9 9 5 5
l 0 2 9
9 9 5 5
E d L
P P 4 4 _ _
E n d