Maintenance And Troubleshooting - BenQ WiT Guia Del Usuario

Using the Lamp
Turning on/off the Lamp and Entering Eye-care Mode
• To turn on the lamp, gently touch the metal ring on the lamp.
To turn off the lamp, touch the metal ring again. You can also
turn the lamp on by pressing the knob on the lamp.
• To enter Eye-care Mode, touch and hold the metal ring on
the lamp for approximately 2 seconds when the lamp is on.
The Eye-care Mode indicator will light up green. The Eye-
care Mode protects your eyes by adjusting the lamp's
brightness according to the ambient lighting condition
automatically and optimizing the color temperature settings
for screen reading.
• Do not block the Eye-care sensor on the lamp. Otherwise the
Eye-care Mode will not function properly.
• Do not hold the metal ring when adjusting the angle of the
lamp arm.
•
The Eye-care Mode will exit automatically and the Eye-care
Mode indicator will go off if you manually adjust the
brightness and/or color temperature using the knob on the
lamp.
Adjusting Brightness and Color Temperature
• When the lamp is on, turn the knob on the lamp clockwise
to increase brightness, or counter-clockwise to decrease it.
• When the lamp is on, press the knob on the lamp to switch
to the Color Temperature menu. Then, turn the knob
clockwise to increase color temperature (the light becomes
whitish), or counter-clockwise to decrease it (the light
becomes yellowish).
To switch back to the Brightness adjustment, press the knob
on the lamp again.
Adjusting Angle
You can adjust the angle of the lamp arm according to your
desktop space to obtain a suitable lighting effect [Figure

Maintenance and Troubleshooting

Turn off the lamp first, and unplug the lamp from the power outlet. Wipe any smears or dusts off
the lamp's outer casing using a soft, lint-free cloth lightly moistened with a mild detergent
solvent. Do not use alcohol or any other chemical solvents like kerosene, naphtha and so on, as
the lamp's casing may become damaged.
Do not rinse the lamp or any of its components directly with water.
If the lamp does not turn on, check to make sure that there are no loose connections between
the power cord, power adapter, and the power outlet.
If the problem persists, please contact the original place of purchase for help.
Specifications
Model
DC power input
Max. power consumption
Dimensions
2 English
AR15 _D
12V, 1.5A
18W
590 x 220 x 625mm (W x D x H)
].
D
Eye-care Mode
indicator
Eye-care sensor