Bluetooth Playback; Audio Input - Xindao Р326.963 Manual Del Usuario

All manuals and user guides at all-guides.com

Bluetooth playback

1. Connect the DC5V/2A adapter to the product, and turn the power indicator on. Hold down
play/pause to turn on the speaker. The blue indicator will flash quickly and the speaker will
release a prompt tone to indicate it's turned on.
2. Turn on Bluetooth on your device and scan for Bluetooth devices.
3. Select the speaker (pairing name: "speaker lamp"), select the device's name to pair (if
your phone requests a pairing code, please enter 0000). After successfully pairing, the
speaker produces a connected tone and the blue indicator light will be flashing slowly
indicating it's ready to play music wirelessly. Touch Play / Pause button to play music.
4. If the pairing timeout or blue status indicator stops flashing, please turn off the power to
restart, then repeat steps 1-3.
5. After successfully pairing, hold down Play / Pause button for 2 seconds to disconnect the
current Bluetooth connection, and the blue indicator will flash quickly and re-enter pairing
state. Touch Play/Pause again to connect the previous device, and holding down would turn
off the Bluetooth.

Audio input

The speaker will automatically switch to Audio Input mode when inserting the audio cable,
and the status indicator is on. Please insert the other end of the audio cable into the audio
port of MP3, IPOD, cell phone or other audio devices, adjust the device's volume to achieve
the best sound.
Lamp function
1. Connect DC5V/2A adaptor to the product, power indicator on. Touch lamp On/Off switch
once to turn the light on and touch again to turn it off. To adjust the brightness of the LED
light, hold down the lamp On/Off switch.
2. Click "M" to switch light mode: natural light—white—yellow
Cautions
1. Only use the included accessories.
2. When the LED light is on, please keep your eyes away from the lamp to avoid being hurt.
3. This lamp is for indoor use only.
4. Please keep this lamp away from rain, water, fire or other high temperature environment.
5. Please do not bend the lamp pole frequently, or it may be damaged.
6. Please make sure the output current is at least 2A when charging with DC5V power
adapter.
5
P326.71X_USB_Charging_Lamp_And_Speaker_manual.indd 5 21-3-2017 11:53:39