Maintenance; Technical Parameter - Hiyasu CA 90 Manual De Funcionamiento

ManualCortinaHiyasuEng 2/5/05
Operation
1- Turn on the power switch
2- Set the switch on Hi or Lo position with your hand or telecontroller
Adjust the grate to obtain the best effect
3-
10°
1- Disconnect power source before unit operation, routing maintenance must be done every year.
Use the unit at the rated voltage and frequency indicated on the nameplate.
2-
3- Never use petrol, benzene, thinner or any other such chemicals for clearing the air curtain.
Do not allow water enter the motor.
4-
5- When power supply comes from socket, the plug must accord with IEC335-1. When the power cord is connected with charging line directly, all pola-
rity switch that the contact gap is 3 mm at least must be installed in the charging line.
Frequency
MODEL
CA 90
50/60
CA 120 50/60
24
18:17 Página 24

MAINTENANCE

Angle adjustment screw
Strong wind

TECHNICAL PARAMETER

Length
Diameter of
Voltage V of body
Hz wheel mm
mm
900
220 136
220 136 1200
Wall mounting
plate (accessory)
Angle adjustment screw
CAUTIONS
Max input Air volume
power W m 3 Air Velocity
Noise dB
Hi Lo Hi Lo
130 120 1400 1050 51-52
160 145 1680 1760 53-54
Wall mounting
plate (accessory)
Breeze
Net
weight Dimension mm
m/s
Kg
8,5-11 11,2 900x220x157
8,5-11 14,5 1200x220x157