Read the Instructions for Use carefully before
using the appliance.
1. Control panel
Refrigerator Compartment
2. Refrigerator compartment light (LED system)
3. Fan
4. Shelves / Shelf area
5. Bottle rack*
6. Multi-flow cold air system
7. Cooler compartment* (best for meat and fish) *
8. Rating plate with commercial name
9. Fruits and vegetables crisper
10. Crisper divider*
11. Doors reversibility kit
12. Egg tray*
13. Bottle holder
14. Door trays*
15. Door seals
Freezer Compartment
15. Door seals
16. Upper zone with flap (freezing zone or storing
frozen food)
17. Twist Ice Maker*
18. Shelves
19. Storage baskets for frozen food items
20. Freezer door trays for frozen products with a short
storage time (
storage compartment)
Anti-bacterial protection:
- Antibacterial filter* in the fan (3)
- Antibacterial additives* in the material of Crisper (9)
- Door seals are made of material able to inhibit
bacterial growth (15)
* Available on selected models
HOW TO CHANGE DOOR SWING
- see enclosed instructions (Model Version_2)
Specifications, technical data and images may
vary from model
QUICK START GUIDE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation automatically. The LEDs indicator
on the control panel will light up for approximately 1 second and after initialization process, the
temperature set-point will be displayed. After appliance has started, wait at least 4-6 hours before
start placing food into it.
Note:
- If food is placed in the refrigerator before it has cooled completely, it may deteriorate.
FAST COOL function. The use of this function is
recommended to increase the cooling speed
when placing a very high quantity of food in the
refrigerator compartment. To activate this
function press and hold the button on the control
panel for 3 sec.
Fast Cool
Fast Cool
ON
OFF
The Fast Cool indicator (yellow LED) will turn on.
The function is automatically deactivated after 10
hours. The Fast Cool function can be manually
deactivated by pressing and holding the same
pushbutton on the control panel for 3 sec., the
yellow indicator will turn off.
Note:
- Fast Cool function should be also switched ON
before placing fresh food to be frozen in the
freezer compartment, in order to maximize the
freezing capacity.
TEMPERATURE SETTING
Press the Temperature button (C) on the control
panel to adjust the temperature from the warmest
through the lower to the coldest level. Pressing the
Temperature button, the temperature setting will
change cyclically. The temperature setting works
for both the refrigerator and the freezer
compartments at the same time. At first plug-in of
appliance temperature setpoint is present at
medium position (factory setting). Following table
shows temperature setpoints:
D
GB
F
NL
E
P
I
GR
S
N
FAN
The Fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food. By default, the fan is
switched on. It is advisable to keep the fan switched on, when the ambient air
temperature is above 27 ÷ 28°C or if you notice drops of water on the glass
shelves or in sever humidity conditions.
Indicator of
temperature settings
TEMPERATURE / FAST COOL
button
FAILURE ALARMS
When the product is plugged in to the
high temp.
mains, during the first 10 minutes of
working, any temperature sensor failure
will be displayed on the control panel
med-high temp.
according to following table. The appliance
will work anyway preserving the food
medium temp.
stored, but it is necessary to contact after
– sales service and provide alarm code.
med-low temp.
low temp.
Legend
Led ON
Led OFF
DK
FIN
PL
CZ
SK
H
RUS
BG
RO
UKR
Internal light switch
Legend
Led OFF
CA
GB
a - ON/OFF button
b - cover of Fan
Refrigerator Evaporator
sensor failure
Refrigerator sensor failure
Refrigerator & Evaporator
sensor failure
Led flashing
5019 620 00012/A