Honeywell 8680i Guia De Inicio Rapido página 11

host, the scanner stores the connection to the host device
address and switches virtual COM ports. This allows the scanner
to automatically relink to the host if the connection is lost.
1. Scan the Non-Base BT Connection bar code below to
unlink your scanner and put it in a discoverable state.
2. Set your host device so it searches for other Bluetooth
devices. (Refer to your host device's User's Guide for pairing
instructions.)
3. Once your host device has located the scanner, select the
8680i scanner name from the list displayed.
4. If a PIN is requested, enter 1234 (the default).
The Bluetooth symbol appears in the scanner window when the
scanner pairs with a host. The connection to the host device
address is stored in the scanner and virtual COM ports are
switched. This allows the scanner to automatically relink to the
host if the connection is lost.
Once the scanner battery is charged and you have paired it to a
host device, you may begin scanning bar codes.
Connect the Scanner via WiFi
Note: WiFi capability is only supported by 8680i scanners that
are licensed for WiFi.
All manuals and user guides at all-guides.com
Non-Base BT Connection
10