Publicidad
Idiomas disponibles
Idiomas disponibles
LF010
QUICK GUIDE TO THE WEBSERVER OF THE LF010 LIMITER
EN
OTHER WAYS TO ACCESS THE WEBSERVER
If the LF010 limiter is connected to a local network (Ethernet or WIFI),
the webserver can also be accessed through it without activating the
'direct mode'. To configure the connection of the limiter to the local
network consult the manual (you will find in the SUPPORT option of
the webserver).
It is also possible to make an Ethernet communication between the
limiter and a Windows PC without activating the 'direct mode', to do
this:
Connect the Ethernet cable between the LAN (RJ45) connectors of
the LF010** and the Windows PC**.
Select the "LF010 Status" icon on the limiter touch screen and
check the IP address that appears under the "Ethernet" option.
Finally open an internet browser and enter the IP address consulted
in the previous step.
NOTE: This method allows you to access to the LF010 webserver and simultane-
ously navigate through the different options of the LF010 without losing communi-
cation.
LF010 LIMITER MANUAL
Once you have entered the webserver, you can download the LF010
limiter manual in the SUPPORT option of the webserver.
Sound level limiter
Spectrum analyser and register by 1/3 octave band
Maracaibo, 6
T. (34) 934 335 240
08030 Barcelona (Spain)
F. (34) 933.479.310
NOTE**: The PC must have the
"Obtain IP address automatically"
option selected in its Ethernet prop-
erties. The LF010 limiter must have
the auto IP option programmed.
info@cesva.com
www.cesva.com
Publicidad
