Adler AD 7966 Manual De Uso página 7

switch off automatically after desired time passed.
8.Press the SLEEP button (4D) to turn off the LCD display (4G). Press any button to illuminate the LCD display again.
9.Press the HUMIDITY button (4F) to adjust the humidifying level: high-medium-low. The default humidification level is high intensity.
10.AROMATHERAPY FUNCTION. Before turn on the device add a few drops of essential oil into the aromatherapy box (5). The oil is not
included in set.
11.To turn off the device press the POWER button (4A).
WATER FILLING
1.Unplug the device during relocating and filling the water into water tank.
2.In case the water in bottom water basin (6) was finished the water shortage sensor (8) will give 2 sounds. On LCD display will be
illuminated the water shortage indicator (11), the device stops operation.
3.Take the water tank (3) away the bottom water basin (6). Take the cover of water tank (1) away to fill up water tank (3). Do not exceed
the MAX level.
4.Always fill the water tank (3) with clean water. Never pour the water into the mist outlet (2). We recommend to use filtered or distilled
water to enlarge the product lifetime. Never leave water in the water tank (3) when the device is not in use. The tap water can be used
also, in this case it is need to clean the water tank (3), water basin (6), atomizer (9) and filter often in order not to affect the mist
efficiency because of scale. The cleaning frequency depends on the degree of limescale in the water.
5.Stand up filled water tank (3) on the water basin (6) tightly. Wait a while to let the water drain from water tank (3) to water basin,. Close
the cover (1).
6.After plug in and switch on the device the water shortage indicator will not be visible at LCD display, the device starts normal operation.
CLEANING
1.Unplug the appliance during cleaning the device.
2.Do not spray with liquid the device.
3.Clean the atomizer (9), water tank (3) and bottom water basin (6) unit every week.
4.Descaling filter (10) should be replaced for new one ones a year. During the year it is enough to wipe it by cloths with washing liquid
and rinse before lay it back at its position in bottom water basin (6).
5.Change the water in water tank (3) once a week or faster if it finished.
6.Clean the whole device, and make sure to keep all parts of the device dry completely when the device is not in use.
In case when the water is hard which means water contains too much calcium and magnesium, they can cause "white powder" problem
and give heavy sediment on the surface of bottom water basin (6), atomizer (9) and inner surface of the water tank (3). Sediment on the
surface of atomizer (9) will make the unit work improperly.
Cleaning the water tank (3):
1.Clean the water tank once a week. Empty the water tank (3) The water tank (3) and bottom water basin (6) raw material consists with
the anti-bacterial components inside.
2.Before refilling, clean it with fresh tap water with gentle washing up liquid. Remove any scale, deposits, or film that has formed on the
sides of the tank or on interior surfaces, and wipe all surfaces dry.
Cleaning of the atomizer (9):
1.Put 5-10 drops of vinegar on the surface of the atomizer (9), wait for 2-5minutes.
2.Brush out the sediment on the surface.
3.Rinse the atomizer with clean water.
7