How To Use; Setting Language - Dreamtech VTT1 Manual De Usuario

How to Use

EN

Setting Language

Press and hold the button for 3 seconds to enter the menu interface. Click the button
to swtich to "Language". Press the button for 1 second to enter the language selection
interface. Click to scroll through the language list, select a language, and then press
and hold for 3 seconds to save your setting.
Cleaning Record
Press and hold the button for 3 seconds to enter the manu interface. Click the button
to swtich to "Cleaning Record" and press the button for 1 second to enter the cleaning
record interface. Then you will see the cleaning recorad of the last 7 days.
Note:
• The display screen will return to the main page if there is no operation for more than 15 seconds.
• To exit the menu interface, click the button to select "Exit".
Switching Suction Level
Press the button to switch between four suction levels of auto, eco, med and turbo. The
corresponding suction level will be highlighted on the display screen.
Only in Auto Mode, the suction level and the color of dust level indicator change with the
amount of inhaled dust. When the smart multi-brush bar is attached, the vacuum will
automatically switch the suction level between the floor/tile and the carpet.
Note: Stop the vacuum at any time while cleaning. It will continue to use the last selected
suction level when starting again.
11