Ace 598-1226-01 Manual Del Usuario página 2

All manuals and user guides at all-guides.com
Installation
IMPORTANT: DO NOT install additional
diode(s) to pushbutton. A dditional diode(s)
will cause chime to malfunction.
1. Attach the two wires from your chime
and transformer to the screw terminals
on the back of your pushbutton (see
Figure 1). Press pushbutton to test
function.
2. If your chime functions correctly and
plays the entire tune, skip to step 7. If
your chime does not function correctly,
proceed with step 3.
Wires from Chime and
Transformer
Screw
Terminals
JUMPER POSITION
MECHANICAL CHIME
ELECTRONIC CHIME
SEE OWNER'S MANUAL
FOR DETAILS
Mounting Holes
Figure 1 - Attach Chime Wires to
Pushbutton (Back of Pushbutton Shown)

Orientation
Marking
UP
598-16-01