Küchenprofi 4 TIME Manual Del Usuario página 7

· Press the HR button to set the hours (up to max. 99 hours).
· Press the MIN button to set the minutes (up to max. 59 minutes).
· Press the SEC button to set the seconds (up to max. 59 seconds).
· Then, please press the STOP / ST RT button in order to start the timer.
· To select additional timers, please repeat the first steps.
· If several timers are being used, the one you started last is displayed. Tip: You can change
this display manually by pressing the buttons of the other running timers ("TIMER 1"
to "TIMER 4"). You can only change the timer, start or stop, whose identifier is shown
in the display.
· After the set time expires, an acoustic signal sounds, an alarm clock symbol blinks, and
the timer counts the time forwards until you press the ST RT / STOP button. If you press
it again, the originally set time appears. Before pressing the ST RT / STOP button, ensure
that the expired timer is shown in the display. If not, switch the image in the display by
pressing the timer selection "TIMER 1" to "TIMER 4".
· Due to the different signal sounds, you can recognize which timer has expired.
1 x PEEP = TIMER 1
2 x PEEP = TIMER 2
3 x PEEP = TIMER 3
4 x PEEP = TIMER 4
· Return the display to "0" by pressing the CLE R button.
c.) Pause
If you press the ST RT / STOP button during operation, you can stop the timer that is being
shown in the display. After this button is pressed again, the timer continues to count the time
down.
d.) Stopwatch
· Select one or more timers ("TIMER 1" to "TIMER 4") and start the stopwatch by pressing
the ST RT / STOP button (up to max. 99 hours 59 minutes 59 seconds).
· Stop the stopwatch by pressing the ST RT / STOP button again.
· Delete the display by pressing the CLE R button.
GB
7