Publicidad
Idiomas disponibles
Idiomas disponibles
Components / Accessories
1 Switch with steps 0-1-2
2 Heating element pipe
3 Supply line
4 Scraper blade
5 Scraper handle
6 Deflection nozzle
7 Nozzle
Attaching the Nozzle onto the Heating Element Tube
A falling down nozzle can set an object on fire. Nozzle must be mounted firmly and secure on the unit.
Touching a hot nozzle can lead to serious burns. Before attaching or replacing a nozzle, allow the unit to
cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only original
nozzles according to the tables that are suitable for your unit.
Putting into operation
Observe the mains voltage, the power source must agree with the value given on the nameplate of the
unit. Extension cords must have a conductor cross section of min. 3×1.5 mm².
Switching on: Set the switch to position 1 or 2. Switching off: Set the switch to position 1 and after
approx. 30 second to position 0.
Maintenance and Cleaning
Before any work on the unit itself, pull the power plug.
For safe and efficient working, always keep the unit and its ventilations slots clean.
If the unit should fail despite the care taken in manufacture and testing, repair should be carried out by an
authorized customer service agent for power tools.
Technical Data
Model
Voltage:
Frequency:
Power:
Switch positions
Temperature
Protection claas
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
Disposal
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to a electrical
appliances retailer.
,
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
8495
230-240 V
50 Hz
2000 W
0
1
Off
approx. 200 C°
II
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
2
1
6
4
2
approx. 600 C°
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
3
5
7
Publicidad
