HEPRO 35208 Manual página 10

Assembling the
COMBI GRIP
Art. No. 35208
A
Unwrap the received parts and make sure nothing
is missing.
It should consist of:
- One hoop grip
A 1
- Two universal connectors
A 2
B
e universal connector is disassembled, into six
parts.
C
Attach the universal connector
pole. is is done by attaching the largest clamp
to the pole and then threading part
and then threading part
Angle part degrees so that the accessories fit.
B 4
Find the desired height and tighten so that the
universal connector holds, but loosely enough that
the accessories can be threaded on as described
in the next step.
10
to the Gripo
A 2
to the pole
B 1
to .
B 3 B 6
A 1
B 6 B 5 B 4
B 2
A 2
B 3 B 2 B 1