Power Saving Settings; Alarm Interval & Shooting Interval; Maximum Shooting Time & Recording Time - Zumimall F5 Manual Del Usuario

9. Power Saving Settings

9.1 Alarm interval & shooting interval
This is a function that avoids repeated alarms for the same event.
You can choose an alarm interval of different lengths, if the interval
is 5 minutes, then the camera is triggered at 08:00, you will receive
an alarm message, and you will not receive a new alarm push in the
next 5 minutes, even if motion detection continues to occur.
NOTE: This function is off by default, you can set it as needed.
9.2 Maximum shooting time & recording time
You can choose a different recording length if you set the recording
length to 20 seconds, then after the camera is triggered, you can
view the 20 seconds of alarm video in the history of cloud playback.
5:51
<
Power saving settings
5 minutes >
Shooting interval
20 minutes >
Maximum shooting time
5:51
<
Shooting interval
Off
2 minuters
5 minuters
10 minuters
8
F5@zumimall.com
5:51
<
Maximum shooting time
10 seconds
20 seconds
30 seconds
The shorter the maximum shooting time setting, the lower
the power consumption.