Miscellaneous - Medisana 60070 Instrucciones De Manejo

GB
3 Operation / 4 Miscellaneous
3.2
Switching on /
Regulating the
settings
3.3
Illumination

4 Miscellaneous

4.1
Cleaning and
maintenance
10
Connect the mains adaptor lead to the socket
the mains outlet. After a short press of the I/O button
to nebulize the water on low level (level 1) and the fan will start up. At the
same time, the LED-indicator level 1
6
I/O button switches to high level (level 2) with higher fan output. At
the same time, LED-indicator level 1
unit's automatic cut-off feature ensures that the fan and nebulizer are auto-
matically switched off when the water reservoir is empty.
Operating time
Level 1 when filled with 100 ml of water: approx. 4.5 hours.
Level 2 when filled with 100 ml of water: approx. 3 hours.
The water tank in the MEDISANA
illumination unit that can be activated / used as follows: One press of the
8
light button switches on the illumination unit. It will light up in the following
colours (changing constantly according to this sequence): Blue, violet, red,
light green, green, light blue. Press the light button
automatic changement of colours and set the currently active colour as per-
manent colour for the illumination. Further presses on the light button
change the colour according to the above mentioned sequence. Pressing the
8
light button again after the last colour (light blue) switches off the illumi-
nation unit. Illumination can be used independently of the fan and nebulizer.
When the unit switches off automatically, the illumination remains on. The
intensity of the light decreases when the nebulizer is activated.
•
Before cleaning the unit, make sure that the unit is switched off and the mains
adaptor is unplugged from the outlet.
•
Clean the outside of the unit with a soft, damp cloth.
•
Please do not use any aggressive substances for cleaning, such as scouring
cream or other detergents, as these may damage the surfaces.
•
With frequent operation we recommend that you clean the unit thoroughly at
least once a week. You can rinse out the water tank and atomiser attachment
with hot water (40 - 60°C) or an alcohol of at least 75% vol. The atomiser
chamber and water tank chamber should be cleaned using an alcohol-soaked
cloth and cotton bud. Take care to ensure that no water gets inside the item.
•
If you do not intend to use the unit for an extended period of time, empty any
remaining water from the water tank and dry off the unit.
•
Limescale can be removed using a mild descaling agent such as citric acid.
Dissolve the substance in water according to the manufacturer's instructions,
pour it into the water tank and leave it to take effect for several hours. Then
rinse both parts with fresh water.
CAUTION
Do not allow water to penetrate the device.
•
Store the unit in a cool, dry place.
5
and plug the adaptor into
6
7
will light up. A further press of the
7 9
and level 2
Medibreeze Aroma features an internal
8
, the unit will start
will light up. The
G
G
G
G
again to stop the
8
G
G
G
G
G
G
G