Installation Instructions - Duronic TVB420 Manual De Instrucciones

Tilt: -15˚ +9˚ Rotate: 360˚
Hardware Kit
a. Wood Screw x 4
d. M5 x 15 Screw x 4
g. M6 Flat Washer x 8

Installation Instructions

Swivel: 180˚
b. Concrete Anchor x 4
e. M6 X 15 Screw x 4
h. M6 Nut x 8
1. If the mounting holes are spaced
400x400mm apart, use the adaptor
plates.
2. Use the wall plate as a template to
drill four holes of M10 diameter and
50mm depth in the concrete wall or
the hard wood wall. Then wedge four
plastic concrete anchors into the holes.
6
c. M4 X 12 Screw x 4
f. M8 x 15 Screw x 4