Duronic DPS Manual De Instrucciones página 7

Lifting the Screen
1. Turn the locking lever from the "LOCK"
position to the "OPEN" position.
2. With one hand, hold the base and
with the other hand pinch together
the D-shaped rings and lift the screen
upwards to the maximum height.
Lowering the Screen
1. Hold the base steady with one hand, and
with the other gently push the screen
down into the casing.
2. Turn the locking lever from the "OPEN"
position to the "LOCK" position.
Cautions:
• Make sure that the screen is extended from
the casing gently.
• Make sure that the screen is retracted back
into the casing after each use. Failure to do
so may result in damage to the locking catch
and can also allow the screen to gather dust.
If the screen gathers dust, simply clean with a dry cloth or duster.
The screen is made of PVC. If the screen has a mark or stain that needs to
be removed, use a wet cloth with a mild soap to gently clean the screen. Use
minimal pressure to prevent damaging the fabric.
Do not use any abrasive chemicals or cleaning agents on any part of the
screen.
Operating Instructions
Cleaning
7