Handling Records; Playing Records; Operating The Product During Playback - Silvercrest 288644 Instrucciones De Utilización Y De Seguridad

To switch off the record player
¾ ¾
POWER button
16
˜ Handling records
Only touch record players with clean hands,
¾ ¾
and by their edges . Touching the surface of a
record causes the sound quality to deteriorate .
Do not touch the grooves .
¾ ¾
To clean records, use a soft anti-static cloth
¾ ¾
and a vinyl/shellack record cleaning agent
(available at specialty retailers) to carefully
wipe the surface .
Store records in a dark, cool place and in their
¾ ¾
protective sleeves when they are not in use .
Always store records upright .
¾ ¾
Do not expose records to direct sunlight; do
¾ ¾
not place them near heat sources (radiators,
ovens, etc .), or in places that are affected by
vibrations, too much dust, heat, cold or damp .
˜ Playing records
Remove the head-shell
¾ ¾
forwards on the pickup needle
Pick up the record by the edges and place
¾ ¾
it carefully over the centre spindle
turntable .
12
If you are playing a single with a large hole in
the centre, place the single adaptor
centre spindle first .
11
Select the desired playback speed using the
¾ ¾
speed selector switch
indicated on the record) .
Records may have the following speeds:
33 rpm = long-playing record (LP)
45 rpm = singles and 12 maxi singles
78 rpm = for shellac records
56 GB/MT
, press the
14
again .
by gently pushing if
9
.
8
on the
11
on the
15
(the correct setting is
6
Release the tonearm
¾ ¾
by pushing the safety lever
7
the side .
Raise the tonearm
¾ ¾
cue lever back .
4
Swing the tonearm
¾ ¾
listen to . Pull the cue lever
to lower the pickup needle
The record player switches on automatically as
soon as the tonearm
towards the left .
7
As soon as the tonearm
¾ ¾
middle of the record and therefore the end of
the recording, it will lift up and position itself on
the rest .
7
The record player then turns off .
NOTE: After use – Always secure the
tonearm by allowing the safety lever
3
lock into place .
Press the POWER button
¾ ¾
record player .
14
NOTE: Always ensure that the tonearm
secured before transporting the product .
˜ Operating the product during
playback
Briefly interrupt playback: Push back the cue
¾ ¾
lever . Playback stops; the record player
4
continues to operate .
Stop playback: Swing the tonearm
the rest . The record player then turns off .
7
ATTENTION! Do not turn the record player
off while the pickup needle
the record . This may damage the record .
Always lift the tonearm
lever . Position it on the rest
4
removing the record .
from the tonearm rest
3
gently to
5
by carefully pushing the
3
to the song you wish to
3
slowly forward
4
onto the record .
8
is moved from its rest
3
has reached the
3
5
to turn off the
16
3
back on
3
is still resting on
8
with the cue
3
before
7
to
is