Use And Operation; Product Description; Using The Product - Becken BKS2389 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Due to continuous improvements, this product is subject to change without
notice. Product appearance and color on your item may differ from this manual.

2. USE AND OPERATION

2.1. Product Description

MODE key:
Press to change the
unit of measure
(g/oz/ml/cup)
Switching Off
The scale will switch off when "TARE" is pressed for 2 seconds.
The scale will automatically switch off after approximately 60 seconds of inactivity.
Changes in Units of Measurement (g/oz/ml/cup)
Press "MODE" once changes the unit of measurement from g/oz/ml (water)/cup
(water)/ml (milk)/cup (milk).
Ml/Cup Measurement
Put a container on the scale and press "TARE" to clear the weight of container.
Then, put water or milk into it, press "MODE" until "ml" or "cup" are displayed to
check the volume.

2.2. Using the Product

Weighing
Step 1: Place the scales on a hard, flat surface.
Step 2: Press "TARE" once. The LCD display will show "zero".
Step 3: Put the items on the scale, the weight will be displayed.
6
TARE key:
On/Off function
Tare function
Tare Function
Step 1: Put the container on the scale. The LCD display will show the weight of
the container.
Step 2: Press "TARE" to clear the weight of the container (reset to zero). Then
put items into the container. The LCD display will show the weight of the items
only. Press "TARE" several times to weigh different items.
Step 3: The LCD display will show a negative amount for the container if you
remove the items and the container from the scales together. Press "TARE"
again and the display will show "zero" after 2 seconds.
Please note:
If the tare weight is less than 100 g, it will show:
If the tare weight is more than 100 g, it will show:
Digital Kitchen Scale | Balanza de cocina digital | Balança de cozinha digital
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido