Datacom TDT-HD150 Manual De Usuario página 27

(2) Video Setting
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to select an
option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the
menu.
(a). Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen or Auto to get the maximum display when watching TV.
(b). Resolution
If the video does not appear correctly, change the setting. This setting is to
match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080p]: for NTSC or PAL system TV.
(c). TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(d). Video output
[CVBS]: CVBS output.
[RGB]: RGB output.
All manuals and user guides at all-guides.com
(3) Channel Search
To access the menu, press MENU and
provides options to adjust the earch hannel settings. S
Select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT to exit the M enu.
(a) . Auto Search
Search and install all channels automatically. This option overwrites all
preset channels.
a. Select [Auto Search] and press OK or RIGHT to start channel search.
b. To cancel channel search, press EXIT.
(b). Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search
screen will appear.
select [Search Channel]. The M enu
C
s