Silvercrest Z30412-IT Manual Del Usuario página 181

66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 183 25.05.11 12:21
11. Press the SET button
your settings. The decimal point digit
flashes.
12. Press the SELECT button
edly until the decimal point is in the
desired position – in this example
before the "1".
13. Press the SET button
your settings. The -:-- display appears
in the LC display
COST / kWh (cost / kilowatt-hour)
display is no longer illuminated.
14. Press the FUNCTION button
end your input.
15. Press and hold down the FUNCTION
button 2
switch to the basic mode (voltage
display).
3 to confirm
3 to confirm
. The
1
for approx. 3 seconds to
6 repeat-
2 to
GB/MT 183