Duronic OX01R Manual De Instrucciones página 7

• This device is not suitable for anyone who is allergic to rubber.
• You may feel discomfort or pain if using the device continuously. It is
recommended that the sensor should not be applied to the same finger for
over 2 hours at a time.
• The infrared light emitted from the device is harmful to the eyes, so the
user and anyone using the device should not stare at the light.
Attentions
• Please check the packs contents before use to make sure the device and
accessories are totally in accordance with the list in section 4. If you are
missing any parts, please contact Duronic directly for assistance.
• Keep the oximeter away from dust, vibration, corrosive substances,
explosive materials, high temperature and moisture.
• Enamel or Acrylic fingernail polish or other fingernail applications may
distort and/or produce inaccurate readings. Please remove them before
use.
• This device is not intended for treatment.
• If the oximeter gets wet, stop using it immediately.
• When it is carried from a cold environment to a warm or humid
environment, please do not use it straight away.
• Do not expose to high temperature or clean with high pressure steam as
this will damage the oximeter. Please read the cleaning and disinfection
instructions in this user manual for advice on how to clean it safely and
effectively.
• Do not submerge the oximeter in water or any other liquid. When it needs
cleaning, please wipe its surface with medical alcohol with a soft cloth. Do
not spray any liquid on the device directly.
• Do not use this device on young infants or newborn babies.
• This oximeter is suitable for children above four years old and adults
7