Setting The Weekly Program - Silvercrest Classic Model L Manual Del Usuario

All manuals and user guides at all-guides.com
68 GB
91033_silv_Heizkoerperthermostat_Content_ES.indd 68
The intelligent radiator control unit carries out
a test run.
During this time „AdA" and the activity sym-
bol are shown in the display and operation
is not possible.
Note: If the adapting run is initiated before
installation, the motor similarly travels back to
the „INS" position. If an error message (F1,
F2, F3) is displayed, press OK and the motor
travels back to the „INS" position.
Start-up

Setting the weekly program

Up to 3 heating phases (7 switching time points)
can be set separately for each weekday in
the weekly program. The programming is done
for the selected days and temperatures must be
stored for a time period from 00:00 to 23:59.
09.07.13 11:07