Configuration Menu Of The Dual-Band Wifi Range Extender - Silvercrest SWV 733 A1 Manual Del Usuario E Información De Servicio

SilverCrest SWV 733 A1

Configuration menu of the dual-band wifi range extender

You can open the configuration menu of the dual-band wifi range extender on your computer with an
Internet browser. In this configuration menu, you can make advanced settings of the dual-band wifi
range extender, display information or install a new firmware version.
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings on your computer and have manually
set an IP address, you must restore the network settings to Automatically obtain
an IP address. For further details, please read the operating instructions for your
computer.
1. You can then configure the dual-band wifi range extender via the network cable. If you want to
configure the dual-band wifi range extender via the network cable, you must connect the dual-band
wifi range extender to your computer. Use the network cable included with the device for this
purpose. Insert one end of the network cable into the WAN/LAN socket (6) or the LAN socket (7)
of the dual-band wifi range extender and the other end into the LAN socket of your computer.
2. Alternatively, you can perform the configuration via a wireless network. To do so, start the search
for available wireless networks on your computer. The network SWV 733 A1 2.4G or SWV
733 A1 5G is displayed in the list of available wireless networks. Select the network SWV 733
A1 2.4G or SWV 733 A1 5G and click on the Connect button to connect wirelessly with the
298 - English