Care And Maintenance - Quarkpro FLARE RGB Manual De Usuario

TIME Key-press
Press "TIMER",timer and ration. Show circularly the picture 2 and picture 3,it mean
the machine will be worked as the setup of picture 2, 3, 4 and 5. Press the "TIMER"
again,return to the main menu.
VOLUM Key-press
Press "VOLUM",the machine start to working, show the picture 1 spary time. But sorry this
machine can not adjust the smoking output. Press the "VOLUM" again,return to the main
menu.
MANUAL Key-press
Press "MAUAL",the machine can set the LED color and Function.
Througt "UP " "DOWN" to choose the mode 0~9, refer picture 5 to show you how
to operation.
DMX control
DMX have priority when the machine put in the XLR socket.(it means the machine is
controlled by DMX,the data will be connected the DMX, all the key-press on the machine
will be stop using.
The machine have 6CH of DMX. You can connect several piece LED up fog machine with
XLR signal line to work together!
CH1 Smoking
CH2 Green color
CH3 Blue color
CH4 Red color
CH5 Seven color change
CH6 Seven color auto and speed
CH7 Seven color strobe and speed

CARE AND MAINTENANCE

It can reduce spare parts change and repair charge if you clean the machine termly.
- Remove the filter,which protects the fan against dust and dirt,from time to time
and clean it.
- Check the state of the fluid filter from time to time and clean or replace it
when necessary.
- After several hours of operation,some droplets of condensation will have formed
at the nozzle. That is normal and not a malfunction.
- Remove fluid droplets at the nozzle only when the machine has completely cooled off.
- Please keep the liquid clean.
4