Axis 213 Instalación página 4

AXIS 213 - Installing the AXIS 213
4
Manual Installation using ARP and Ping in Windows
Follow these instructions to assign a unique IP address to your product from a
computer on your network:
1. Acquire an unused IP address for the AXIS 213 from your network
administrator.
2. Connect a standard network cable to your AXIS 213 and connect it to the
network.
3. Locate the serial number/MAC Address (S/N) found on the label on the AXIS
213.
4. From a computer on your network, open a Command Prompt, i.e. from the
Windows Start menu, select Run... and type cmd in the field. Click OK.
5. Enter the commands:
Syntax:
arp -s <IP address> <MAC address>
ping -l 408 -t <IP address>
Example
6. Connect the power to the AXIS 213.
7. When 'Reply from 192.168.0.125: ...' is displayed (approximately 10-15
seconds), type Ctrl+C to close the ARP Ping session.
8. Start a Web browser and enter the IP address in the Address/Location field.
9. Press Enter.
10.Enter a password for the root user (administrator).
11. If required, accept the installation of AMC onto your workstation. See AXIS
Media Control (AMC), on page 2 for more information.
12.The installation is now complete. For more information, please refer to the
AXIS 213 User's Manual or the online help files.
All manuals and user guides at all-guides.com
Note: The ping command is
followed by -l (lower case L)