READ THESE INSTRUCTIONS CAREFULLY
BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL NOTES
Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do
;
not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
;
of entrapment or falls.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails. (See Page 9)
;
Do not allow children under 6 years of age to use the upper bunk.
;
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
;
position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
;
Always use the ladder for entering and leaving the upper bunk.
;
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
;
Use of a night light may provide added safety precaution for a child using the upper bunk.
;
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the
;
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
;
Prohibit more than one person on upper bunk.
;
STRANGULATION HAZARD
;
designed for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
Keep these instructions for future reference.
;
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be
;
certain all staples are out of the box before beginning assembly on the shipping carton.
Replacement parts, including additional guardrails, may
be obtained from any of our Lea Industries dealers.
Use the illustrations below to correctly identify each of the parts for your bed
Carton #1 (1 required for Loft Bed)
Large Loft End (2)
SLAT Pack (1)
All manuals and user guides at all-guides.com
- Never attach or hang items to any part of the bunk bed that are not
Identifying the Parts
Carton #2 (1 required for Loft Bed)
(1) Hardware Bag & Instruction Booklet
Page 2