Features
The Hand Warmer:
•
is an air heater, powered by the battery power (24V) of a power chair.
•
is fully adjustable to individual possibilities and needs with well-thought-
out electronics (mini USB connection).
•
recycles air instead of using air from the cold environment: it draws
air in at the front, heats it and forces it out again at the front using an
internal fan. This results in a huge advantage with regards to the power
consumption and efficiency.
•
a mechanical switch (e.g. mo-vis Twister) can be immediately plugged in
(on/off, select power levels) although you also have an on-board push
button.
•
LED indicates the status of the device.
NOTE:
A Perspex dome-shaped 2-hands hood is available to better
maintain the air temperature around the hands.
Operation
At the back of the device, a jack connection (1) and push button (2) are
provided.
Hand Warmer User manual
11