Sinbo SMX 2724 Manual De Instrucciones página 8

KNOW YOUR MIXER
1. Speed selector/Ejector button
1
2
2. Turbo button
4
3. Unit
3
6
7
4. Handle
5. Beaters
5
6. Dough hooks
7. Washer
• Turbo function with safety device: turbo function only works when the appliance is
functioning
• Body with transparent decoration piece
• Eject button with safety device: blokced while the appliance is functioning ;
• AC230V, 50 Hz, 300W
USING YOUR MIXER
1. For the first use, cleaning the dough hooks?whisk and beaters. Before assembling the
mixer, be sure the power cord is unplugged from the power outlet and the speed selector
is on the 0 position.
2. Assemble proper beaters or dough hooks into mixer.
Note: Beaters can be inserted in either socket, as the beaters are identical. For dough
hooks, the one with washer can only be inserted into the big socket and the other one
can only be inserted into small socket. The two dough hooks cannot be inserted in reverse.
The whisk can be inserted in either socket.
3. Ensure that the unit is at the 0 setting, then plug in the power source.
4. There are 5 setting. Turn the speed selector to your desired setting and the appliance
will start working. And the speed will achieve the highest setting if the Turbo Button is
depressed at any time.
Warning: Do not stick knife, metal spoons, fork and so on into bowl when operating.
5. The max operation time per time shall not exceed 5 minutes. When kneading yeast
dough, we suggest that the speed selector should be at low speed firstly and then use
high speed to achieve the best results.
6. When mixing is completed, turn the speed selector to 0 position, unplug the cord from
power outlet.
7. If necessary you can scrape the excess food particles from the beaters or dough hooks
by rubber or wooden spatula.
8. Hold the beaters/dough hooks/whisk with one hand and press the Ejector button firmly
down with the other hand, remove the beater/dough hooks/whisk.
Caution: The ejector button can be pressed down only the speed selector is on the 0
- 7 -