Bionik BT Audio Sync Guia Del Usuario página 7

NOTE: The BT Audio Sync
device after the initial pairing.
PAIRING 2 DEVICES SIMULTANEOUSLY
1. Turn o your first device that is already paired to the BT Audio Sync
2. Follow all of the steps above in the "PAIRING YOUR DEVICE" section to
pair your second device.
3.
Once the second device is paired, turn on your first device. It will
automatically begin to pair with the BT Audio Sync
4. Once both devices are paired, the LED on the BT Audio Sync
solid white.
NOTE: Both devices must be same sampling rate or use aptX. When
using a true wireless headset, only one can be used at anytime.
CHARGING YOUR SWITCH
1.
The BT Audio Sync
2.
Connect your powered USB-C
port on the bottom of the BT Audio Sync
3. Charging of your Switch
begin immediately.
NOTE: Audio devices that are paired to the BT Audio Sync
momentarily lose connection when a powered USB-C
plugged into or removed from the passthrough on the BT Audio Sync
The connection will be re-established automatically.
will automatically find and pair with your
™
AND SWITCH
™
includes a passthrough USB-C
™
cable (not included) into the USB-C
™
and Switch
™
6
.
™
LITE
™
™
.
™
Lite console should
™
.
™
will be
™
port (FIG. 3).
™
will
™
cable is either
™
™
.