Goclever Eye TAU Manual Del Usuario página 5

All manuals and user guides at all-guides.com
GB
Turning on Goclever Eye for the first time.
I. Plug in the camera to a power supply.
II. Use the Goclever Eye mobile application to set-up Wi-Fi connection.
IMPORTANT: It is necessary to use the mobile application to set-up
the camera for the first time.
1. Download and run the mobile application (instruction below), select
"Add new camera".
2. Select "One key to add" option, then input the Wi-Fi password and
align device with camera like on the picture below and press "start
configuration" .
3. Camera will give a voice signal once paired successfully.
4. Confirm the camera ID in application. Camera is now connected to
Wi-Fi network.
Using Goclever Eye with a PC
In order to use the camera via a PC download our Goclever Eye PC
www.goclever.com/goclevereye
software from or open the
web user interface available for Internet Explorer and Firefox. The
recommended web browser is Internet Explorer.
a) Using Goclever Eye PC client
1. Go to www.goclever.com/goclevereye and choose support to
download Goclever Eye PC client.
2. Install it and launch it.
3