After Treatment; Maintenance & Storage; Accessories And Spare Parts - HoMedics Beauty Remove MD-1000-EU2 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
• DO NOT hold the cooling surface on the same area of skin for
more than 10 seconds. The product is designed to be moved
continuously across the surface of the skin.
• Press and hold the cooling
cooling surface off
NOTE: the cooling surface is equipped with a 2.5 minute auto –
off feature.
NOTE: the cooling surface operates independently. It is normal for
the unit to feel warm when using the cooling surface

After treatment

• Press and hold the power button for 2-3 seconds to turn off
device.
• Wash your face with cold water to remove any remaining
dead skin cells and then apply your preferred moisturiser.
NOTE: Avoid using AHA (acid based) moisturisers on the day of
treatment
• Depending on your skin type, you may experience some
reddening or increased sensitivity after treatment. This is
perfectly normal and usually subsides within a few hours.
• Avoid direct sun exposure after treatment, consider applying a
stronger sunscreen as required.
• Always, dispose of the used black wool filter and replace with
a new filter ready for next use.
• Remove dead skin cells and debris from the diamond tip using
the brush provided. We also recommend the periodic use
of an ultrasonic cleaner for deep cleaning the diamond tip,
especially if it starts to feel smooth or less effective.
Other Treatments
Other areas of the body can also be treated 2-3 times a week.
For example, neck, chest, hands etc. When treating larger areas,
replace the black wool filter part way through the treatment in
order to maintain the level of suction. Aim to cover the same area
no more than 2-3 times in one treatment.
FAQ
How often should I use the product?
It's best to start slowly – usually just once a week, then build up
to 2 or 3 times a week if this is comfortable for your skin.
Will it hurt?
No. Treatment should not be painful. Depending on the sensitivity
of your skin, you may feel slight discomfort from the diamond tip
as it moves across the skin and there could be some short term
redness or sensitivity after treatment, but this will soon subside.
If treatment is uncomfortable, then you may need to use a lower
power setting or switch to the sensitive diamond tip.
Can I use the product in combination with anti-aging
creams/serums?
If your anti-aging cream or serum contains AHA (or acid) then it
should not be used on the same day as the microdermabrasion
button for 1 second to turn the
GB
treatment, but can be used on non-treatment days. Non-AHA
(acid free) anti-aging products can be used at any time.
The product does not switch on
The power button has to be pressed continuously for 2-3 seconds
to turn the product on. If you try this and it still doesn't work,
then it may need recharging. See 'CHARGING THE BATTERY'
The product seems to be losing power
This can happen if the black wool filter is not replaced after each
treatment. Try fitting a new filter. Also check the tip to ensure
that the plastic part of the tip has no cracks or damage. Check
that the two rubber o-rings are in place on the nozzle end of the
unit (where the tip fits over).
The diamond tip no longer seems rough
The diamond tip can accumulate skin cells over time which
may start to make it feel smooth and reduce its effectiveness.
If this happens we recommend cleaning the diamond tip in an
Ultrasonic Cleaner. These are either available to purchase, or
jewellery stores offer a cleaning service. If using the product
regularly you may need to do this several times a year to maintain
optimum effectiveness.
What if I still have a problem or question that is not
answered here?
Please contact our service team who will be very happy to help
you.
Customer Service
Tel: +44 (0) 1732 378 557
Email: support@homedics.co.uk
www.homedics.co.uk
MAINTENANCE & STORAGE
To Store
Place attachments into their proper compartments inside the
storage case. Store case in a safe, dry place, out of children's
reach.
To Clean
Always unplug before cleaning the unit. Never use liquids or
abrasive cleaners to clean the housing of the unit or the case.
Wipe off case with a damp cloth. Clean attachments periodically
using detergent. Allow attachments to dry before inserting them
into the hand unit.

ACCESSORIES AND SPARE PARTS

Avialable from our website: www.homedics.co.uk
• Replacement Black wool filters (100pcs)
• Diamound tip
• Sensitive diamound tip
• Precision tip - for precise treatment of small areas
• Body tip - for use over larger areas.
4
I

Publicidad

Tabla de contenido
loading

Productos relacionados para HoMedics Beauty Remove MD-1000-EU2

Tabla de contenido