EN
This manual contains important information that
should be kept for future reference.
Self-assembly.
Warning! Keep children away from the assembly area.
Leave the plastic bags out their reach. The small parts
pose a choking hazard.
Dimensions
Dimensions of bed unfolded: 219x174 cm.
Dimensions of bed: 195x140 cm.
Materials
Fabric Cover: 100% polyester.
Padding back: polyurethane foam AIR SOFT 21 kg/m3.
Padding seat: polyurethane foam ESP 30 kg/m3.
Armrest padding: polyurethane foam 21 kg/m
Seat Suspension: straps mounted on mechanics.
Armrest structure: chipboard reinforced with fir
panels.
Structure of back: chipboard reinforced with multiply
panels.
Bed base:
electro-welded metal.
Mattress thickness: 14 cm
Feet: MOPLEN plastic.
Assembly instructions
Before beginning assembly, identify all components
using the manual.
In order not to lose components, do not throw the
package before completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to
where you want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
The transformation into bed is realized with a single
motion without moving the seat cushion and backrest.
Do not make changes in the metal mechanism.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the
mattress protective plastic to prevent the compressed
air hinders the proper functioning of the mechanism
when folding the mattress. During closing of the bed
properly position the mattress whose movement could
damage the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to
avoid the creaking of springs, levers or joints etc ...
Chloe II – 11/2016
Maintenance
Vacuum or brush the cloth once a week. Dust
accumulation accelerates wear and the colors from
fading.
Spills should be removed immediately with a clean and
dry dabbing to absorb the liquid. Do not rub, it may
damage the fabric. Variations in color between the
surfaces cleaned and uncleaned might appear.
Avoid direct and prolonged exposure of the product to
sunlight. The colors may fade.
Do not place the product near a heat source (radiator,
fireplace...) nor a moisture source. The heat and
humidity can damage the product.
Do not use abrasives.
Cleaning by a professional only.
If in doubt, call a professional to carry out
cleaning.
3
.
If you have any comments or suggestions regarding
this product, assembly instructions or service received,
please enquire at your nearest store or contact us on
our website at: www.habitat.eu or write to this
address: HABITAT FRANCE SERVICE CLIENT-42/44
RUE DU FAUBOURG ST ANTOINE 75012 PARIS-
FRANCE
1
Keep the label with lot number, it may be useful
in case of complain.