Program Mode - Cameo CLMPARFOOT Manual De Usuario

OPERATINg INSTRUCTION:
Connect the Foot Controller with the Multi PAR LED Set by using the supplied 10 meter 5-pole XLR cable.
STATIC COLOUR MODE:
Press the MODE button (repeatedly if necessary) to turn on the red LED. Press the UP/DOWN buttons to select the
desired colour.
SOUND CONTROL MODE:
Press the MODE button (repeatedly if necessary) to turn on the green LED. Use the sensitivity control on the rear
to adjust the sensitivity of the built in micophone. To increase sensitivity turn the control clockwise. Press UP/
DOWN buttons to select the desired program.

PROGRAM MODE:

Press the MODE button (repeatedly if necessary) to turn on the yellow LED. Press UP/DOWN buttons to select the
desired program.
FULL ON (all white):
Press one of the 4 buttons for 3 seconds. The mode changes to Static Colour Mode automatically.
BLACKOUT:
Press the Blackout button to turn off the light in any mode and press it again to return to the previous mode.
SIGNAL ON/OFF SWITCH (rear panel):
Switches on/off any signal coming from the foot controller. In "off" position all lights will be turned off.
9